Gentler presentation
Supported movement reduces the need for the product to accelerate down a chute.
02 / Four sorting architectures
DP series · Supported conveying
Belt-type color sorters.
A controlled conveyor presents fragile, irregular, larger or less free-flowing products without relying on a high-speed gravity fall.
Reference familyDP · 64–256 channelsSingle and double-deck references
Reference range4 modelsThree single-deck references
Channel range64–256Published catalogue values
Deck structureSingle / doubleProject-dependent arrangement
Feed principleConveyor beltSupported product presentation
01 / Architecture function
Support the product through the viewing zone.
The belt controls travel speed and orientation more gently than a free fall. This creates a practical starting point for delicate, irregular or large pieces.
DP / Supported pathMeter → convey → inspect → divert.
LoadStabiliseInspectSeparate
Irregular-shape visibility
Conveying helps expose larger or uneven pieces to configured cameras and lighting.
Application-specific handling
Hopper, belt material, cleaning access and enclosure must match the material and operating environment.
Controlled rejection
The reject method is timed to the belt speed, particle trajectory and required separation point.
02 / Model catalogue
Open a model to inspect its reference data.
The supplied catalogue does not publish DP throughput. Capacity must be established from material size, loading density, belt presentation and sample tests.
Single-deck references
Three belt widths and channel scales for progressively larger inspection surfaces.
64 channels · Single deckDPLDS300≤3.0 kW500 kg
Compact belt platform for material trials and lower-volume irregular product streams.
- Channels
- 64
- Deck
- Single
- Power
- ≤3.0 kW
- Voltage
- AC220V / 50Hz
- Weight
- 500±25 kg
- L×W×H
- 3098×820×1660 mm
Supported conveyingColour reviewShape reviewReject timing
128 channels · Single deckDPLDS600≤3.5 kW650 kg
Wider single-deck platform for increased product presentation and inspection width.
- Channels
- 128
- Deck
- Single
- Power
- ≤3.5 kW
- Voltage
- AC220V / 50Hz
- Weight
- 650±50 kg
- L×W×H
- 3098×1130×1660 mm
Supported conveyingColour reviewShape reviewReject timing
256 channels · Single deckDPLDS1200≤5.5 kW1250 kg
Largest published DP single-deck reference for wider product loading and inspection coverage.
- Channels
- 256
- Deck
- Single
- Power
- ≤5.5 kW
- Voltage
- AC220V / 50Hz
- Weight
- 1250±50 kg
- L×W×H
- 3398×1750×1715 mm
Supported conveyingColour reviewShape reviewReject timing
Double-deck specialist reference
A shared specialist platform listed in the supplied DP/DM catalogue section.
240 channels · Double deckDMLSSK1200≤9.5 kW3000 kg
Double-deck structure for projects requiring a second separation stage or specialist industrial-material handling.
- Channels
- 240
- Deck
- Double
- Power
- ≤9.5 kW
- Voltage
- AC380V / 50Hz
- Weight
- 3000±50 kg
- L×W×H
- 5215×1928×3093 mm
Double-deck pathIndustrial feed reviewColour and shape rulesDust-control review
No throughput figures are published for these DP models in the supplied catalogue, so this page does not estimate capacity. Optional anti-breakage hopper, stainless-steel enclosure, IP rating, infrared sensing and remote functions are available only where confirmed for the final model and project configuration.
03 / Typical materials
Use a belt when the product should not simply fall.
Feasibility depends on singulation, surface visibility, product overlap, cleaning needs and whether the target defect can be recognised optically.
Resource recovery
Plastics & recyclables
Flakes, pellets and selected mixed visible material streams.
Fragile product
Botanicals & produce
Medicinal materials, dried or frozen vegetables and selected seafood.
Irregular pieces
Nuts, wood & granules
Products requiring supported travel and application-specific feeding.
The conveyor is part of the optical system.Send particle dimensions, fragility concerns, loading depth and cleaning requirements before selecting a belt width.Start a material review
Compare other architectures
Match the material movement before the camera.
Free-flowing particles may suit a chute, while heavy minerals and tea can require a more specialised path.
Does your product need a supported inspection path?
Send material photos, a short feeding video, defect samples and target output for a DP model review.