Free-flowing solids
Granules
Sugar, salt, seeds, seasoning granules and similar products.
- Typical starting point: volumetric cup
- Check breakage, dust and bulk density
- Stick or side-seal sachet formats
Automatic primary packaging
Package the product your process has perfected.
From dosing behaviour to film, seal and finished pack, COWPIGGY configures automatic packaging systems around the product—not around a catalogue model.
Reference systemMulti-lane packagingConfigured & supplied by COWPIGGY
01 / Product behaviour
The filling system changes with what flows through it.
Particle size, bulk density, dust, viscosity, temperature and dose range determine how the product should be measured and delivered into the pack.
Powders
Coffee mixes, milk powders, flour blends, drink powders and spices.
- Typical starting point: servo auger
- Check flowability and dust control
- Seal-area cleanliness matters
Liquids
Honey, sauces, edible oils, gels, concentrates and beverages.
- Piston, ceramic or peristaltic pump
- Match viscosity and cleaning method
- Confirm temperature and drip control
02 / Pack architecture
Choose the pack the market needs.
Format selection connects consumer use, dose size, shelf presentation, film structure and downstream automation.
Stick packs
Slim packs for measured powders, granules or liquids.
Side-seal sachets
Three- or four-side sealed presentation with a wider print area.
VFFS bags
Vertical form-fill-seal format for larger food portions and retail bags.
Integrated lines
Inspection, counting, grouping, secondary packing and case handling.
03 / Reference systems
Three starting points. Final configuration after product review.
Published ranges below are reference-machine limits. Actual output depends on product behaviour, dose, lane count, film and acceptance criteria.
Granule / stick pack
Multi-lane granule system
A compact high-output path for measured granules in slim single-serve packs.
- Reference lanes
- 4–12
- Reference output
- Up to 500 bags/min*
- Typical dosing
- Volumetric cup
- Final selection
- After product test
Powder / side-seal sachet
Multi-lane powder sachet system
Auger or suitable volumetric dosing with a flat sachet format and integrated discharge conveyor.
- Reference cycle rate
- 25–45 cycles/min*
- Maximum sachet
- 180 × 120 mm*
- Filling options
- Servo auger / cup
- Final selection
- After powder review
Liquid / stick pack line
Multi-lane liquid system
A pump-configured filling and sealing platform with options for counting, grouping and downstream handling.
- Reference cycle rate
- 30–45 cycles/min*
- Maximum stick size
- 300 × 70 mm*
- Reference fill range
- 1–100 ml*
- Pump options
- Piston / ceramic / peristaltic
*Supplier reference data; capacity and pack limits require confirmation against the final material, film and configuration.
04 / Operating principle
Five actions shape every finished pack.
The machine architecture changes, but the primary workflow remains understandable to production, engineering and quality teams.
Control film tension and registration.
Shape the film into the selected pack.
Measure product with the matched filler.
Apply controlled pressure and temperature.
Separate, inspect and transfer finished packs.
Request a packaging configuration
Send the product and pack brief first.
Share the product, target dose, desired pack and output. COWPIGGY will identify the next samples, film data and factory information required.